Fits 25, 27, 30 & 44 original front drum knuckles
- Single large piston calipers pre-loaded with pads
- 11" a 1-1/8" thick standard vented rotors, 5 on 5.5" bolt pattern
- Caliper brackets
- Rubber brake hoses
- Installation hardware
- Lug studs
Part Number DBK5EDF
Rotor Size 11"
Bolt Pattern 5x5.5
Axle 25, 27, 30 and 44
1. Does not include hub or spindle. You must confirm that you have a wheel hub that can accept a rotor. You can check by removing your brake drum and looking at the inside of the wheel hub. If the transition from the wheel bearing area is to the wheel stud flanges has rounded transition and not machined flat, you will need to purchase new wheel hubs to accept the new rotors. See part number: S437. You can call us and we can walk you through this or we can send you pictures of what to look at.
2. Some grinding will be necessary to clear the calipers to the knuckles, this does not affect the strength of the knuckle.
2. These will not fit stock 15 x 6 or 16 x 41/2" wheels without a 1" wheel spacer. If you have newer white spokers or aftermarket rims, you are good to go. If you want a kit that fits stock wheels, see DBK25/27DSW (Dana 25/27) or DBK30DSW (Dana 30/44).