2 hole dash plate with Dolphin quad gauges, speedometer, sending units, mounting bolts, 2 green turn lights and 1 high beam indicator light.
Made from a template of the exact opening of the dash, cut on a water jet cutter. Four 8/32" stainless steel allen heads with flat fender washers and self locking nuts mount it to the dash. This plate is an exact fit for the dash opening. Hole sizes are 3 3/8". Green light hole size is 5/16", high beam light hole size 1/8" Plate is made out of 3/16" aluminum. No drilling or cutting to your dash. (gauges not included)
The gauges come with all new sending units. The fuel sender also comes with 6 hole to 5 hole adapter plate.
Note: if you are using factory steel tank with return line on the sender, you will have to drill and tap the top of the sending unit for a 1/8 NPT x 1/4" barbed elbow (not supplied) for the return line to hook to. If you have a newer poly tank, this is not an issue due to the feed and return lines are separate from the sender.
If you have factory 72/73 Commando steel fuel tank and sending unit with lock ring, you will have get your factory sending unit re-calibrated too match the Dolphin gauges (it will read backwards).